Acer Aspire 8940G - Removing the Standard LCD Bezel

112 Chapter 3
Removing the Standard LCD Bezel
1. See “Removing the LCD Module” on page 74.
2. Remove the four screw caps and screws from the LCD Bezel.
3. Starting from the inside bottom edge, pry the Bezel away from the panel. Move along the bottom edge toward
the hinges as shown.
Step Size Quantity Screw Type
Standard LCD Bezel
(red callout)
M2.5*4 2
Standard LCD Bezel
(green callout)
M2.5*5 2