124 Chapter 3
5. Apply pressure in the direction of the arrow (1) and lift the left side of the bezel away from the LCD Module (2).
IMPORTANT: Do not completely remove the bezel; the Microphone cable is still attached to the bezel.
6. Lift the bottom edge of the bezel away from the LCD Module as shown.
IMPORTANT: Do not completely remove the bezel; the Microphone cable is still attached to the bezel.
7. Flip the bezel over to expose the Microphone cable and module.
8. Disconnect the Microphone cable connector as shown and remove the bezel from the LCD Module.
1
2
To Next Page
Loading...
