Chapter 3 175
2. Turn the computer over. Replace the fifteen (15) screws on the bottom panel.
Replacing the LCD Module
1. Using both hands, set the LCD Module into the Lower Cover, taking care to set the mounting pins into the
bottom cover.
NOTE: Ensure that the antenna, microphone, and LVDS cables pass through the openings on the hinge wells
before securing the LCD module in place.
Step Size Quantity Screw Type
Upper Cover
(red callout)
M2.5*6.5 9
Upper Cover
(green callout)
M2.5*4 5
Upper Cover
(blue callout)
M2*3 1
To Next Page
Loading...
