72 Chapter 3
21. Remove the three screws holding the IO board to the lower case.
22. Detach the IO board from the lower case.
23. Then detach the modem cable (with RJ11 connector) from the lower case.
24. Tear off the mylar holding the speaker set cable carefully.
25. Remove the eight screws fastening the speaker and sub-woofer set.
26. Then remove the speaker and sub-woofer set from the lower case.
Disassembling the Upper Case Assembly
1. Disconnect the touchpad board to main board FFC and remove it.
2. Remove the seven screws and disconnect the touchpad to touchpad board FFC.
3. Detach the touchpad bracket from the upper case.
To Next Page
Loading...
