Chapter 3 75
Disassembling the LCD Module
1. Remove the eight screw rubber as shown.
2. Then remove the eight screws fastening the LCD bezel.
3. Detach the LCD from the LCD module carefully.
4. Remove the four screws holding the LCD.
5. Disconnect the CCD cablem from the CCD board.
6. Take out the LCD from the LCD panel.
7. Remove the two screws fastening the right LCD bracket.
8. Detach the right LCD bracket.
9. Remove the two screws fastening the left LCD bracket.
10. Then remove the left LCD bracket.
11. Disconnect the LCD cable from the LCD and from the inverter.
To Next Page
Loading...
