EasyManua.ls Logo

Acer Aspire E1-522 - Page 60

Acer Aspire E1-522
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60 - Battery pack
Conditioning a new battery pack
Before you use a battery pack for the first time, there is a conditioning
process that you should follow:
1. Insert the new battery without turning the computer on.
2. Connect the AC adapter and fully charge the battery.
3. Disconnect the AC adapter.
4. Turn on the computer and operate using battery power.
5. Fully deplete the battery until the battery-low warning appears.
6. Reconnect the AC adapter and fully charge the battery again.
Follow these steps again until the battery has been charged and
discharged three times.
Use this conditioning process for all new batteries, or if a battery hasn't
been used for a long time. If the computer is to be stored for more than
two weeks, you are advised to remove the battery pack from the unit.
Warning! Do not expose battery packs to temperatures below 0°
C (32° F) or above 45° C (113° F). Extreme temperatures may
adversely affect the battery pack.
By following the battery conditioning process you condition your battery to
accept the maximum possible charge. Failure to follow this procedure will
prevent you from obtaining the maximum battery charge, and will also
shorten the effective lifespan of the battery.
In addition, the useful lifespan of the battery is adversely affected by the
following usage patterns:
www.devicemanuals.eu
4. Turn on the computer and operate using battery power.
www.devicemanuals.eu
4. Turn on the computer and operate using battery power.
5. Fully deplete the battery until the battery-low warning appears.
www.devicemanuals.eu
5. Fully deplete the battery until the battery-low warning appears.
6. Reconnect the AC adapter and fully charge the battery again.
www.devicemanuals.eu
6. Reconnect the AC adapter and fully charge the battery again.
Follow these steps again until the battery has been charged and
www.devicemanuals.eu
Follow these steps again until the battery has been charged and
Use this conditioning process for all new batteries, or if a battery hasn't
www.devicemanuals.eu
Use this conditioning process for all new batteries, or if a battery hasn't
for a long time. If the computer is to be stored for more than
www.devicemanuals.eu
for a long time. If the computer is to be stored for more than
two weeks, you are advised to remove the battery pack from the unit.
www.devicemanuals.eu
two weeks, you are advised to remove the battery pack from the unit.
www.devicemanuals.eu
www.devicemanuals.eu
Warning! Do not expo
www.devicemanuals.eu
Warning! Do not expo
Warning! Do not expo
www.devicemanuals.eu
Warning! Do not expo
se battery packs to temperatures below 0°
www.devicemanuals.eu
se battery packs to temperatures below 0°
se battery packs to temperatures below 0°
www.devicemanuals.eu
se battery packs to temperatures below 0°
C (32° F) or above 45° C (113°
www.devicemanuals.eu
C (32° F) or above 45° C (113°
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
adversely affect the battery pack.
www.devicemanuals.eu
adversely affect the battery pack.
By following the battery conditioning process you condition your battery to
www.devicemanuals.eu
By following the battery conditioning process you condition your battery to

Table of Contents

Other manuals for Acer Aspire E1-522

Related product manuals