Acer Aspire E1-522 - BIOS Settings and Security Features

80 - BIOS utility
BIOS UTILITY
The BIOS utility is a hardware configuration program built into your
computer's BIOS.
Your computer is already properly configured and optimized, and you do
not need to
run this utility. However, if you encounter configuration
problems, you may need to run it.
To activate the BIOS utility, press <F2> during the POST while the
computer logo is being dis
played.
Boot sequence
To set the boot sequence in the BIOS utility, activate the BIOS utility, then
select Boot from the categories listed at the top of the screen.
Setting passwords
To set a password on boot, activate the BIOS utility, then select Security
from the categories listed at the top of the screen. Find Password on
boot: and use the <F5> and <F6> keys to enable this feature.
www.devicemanuals.eu
run this utility. However, if you encounter configuration
www.devicemanuals.eu
run this utility. However, if you encounter configuration
> during the POST while the
www.devicemanuals.eu
> during the POST while the
To set the boot sequence in the BIOS utility, activate the BIOS utility, then
www.devicemanuals.eu
To set the boot sequence in the BIOS utility, activate the BIOS utility, then
from the categories listed at the top of the screen.
www.devicemanuals.eu
from the categories listed at the top of the screen.
Setting passwords
www.devicemanuals.eu
Setting passwords
www.devicemanuals.eu
www.devicemanuals.eu
To set a password on boot, activate the BIOS utility, then select
www.devicemanuals.eu
To set a password on boot, activate the BIOS utility, then select
from the categories listed at the top of the screen. Find
www.devicemanuals.eu
from the categories listed at the top of the screen. Find
and use the <
www.devicemanuals.eu
and use the <
F5
www.devicemanuals.eu
F5
> and <
www.devicemanuals.eu
> and <