Acer Aspire easyStore H340 - Rear View

Chapter 2 11
Navigating Through the Setup Utility
Use the following keys to move around the Setup utility.
 Left and Right arrow keys – Move between selections on the menu bar.
 Up and Down arrow keys – Move the cursor to the field you want.
 PgUp and PgDn keys – Move the cursor to the previous and next page of a multiple page menu.
 Home – Move the cursor to the first page of a multiple page menu.
 End – Move the cursor to the last page of a multiple page menu.
 + and - keys – Select a value for the currently selected field (only if it is user-configurable). Press
these keys repeatedly to display each possible entry, or the Enter key to choose from a pop-up
menu.
NOTE: Grayed-out fields are not user-configurable.
 Enter key – Display a submenu screen.
NOTE: Availability of submenu screen is indicated by a (>).
 Esc – If you press this key:
 On one of the primary menu screens, the Exit menu displays.
 On a submenu screen, the previous screen displays.
 When you are making selections from a pop-up menu, closes the pop-up without making a
selection.
 F1 – Display the BIOS setup General Help panel.
 F5 – Press to load previous default system values.
 F6 – Press to load fail-safe default system values.
 F7 – Press to load optimized default system values.
 F10 – Save changes made the Setup and close the utility.