Chapter 3 27
Removing the System Cover
1. Perform the pre-disassembly procedure described on page 22.
2. Remove the three screws (A) located on the rear panel.
3. Slide the system cover toward the back of the chassis until the tabs on the cover disengage with the slots
on the chassis.
4. Lift the side panel away from the server and put it aside for reinstallation later.
Screw (Quantity) Color Torque Part No.
M3-0.5*4 (3) Silver 5.1 to 6.9 kgf-cm 86.1A524.4R0
To Next Page
Loading...
