Password
To set a password on boot, activate the BIOS utility, then select Security from the
categories listed at the top of the screen. Find Password on boot: and use the
<F5> and <F6> keys to enable this feature.
Power management
This computer has a built-in power management unit that monitors system activity.
System activity refers to any activity involving one or more of the following devices:
keyboard, mouse, hard disk, peripherals connected to the computer, and video
memory. If no activity is detected for a period of time (called an inactivity timeout),
the computer stops some or all of these devices in order to conserve energy.
This computer employs a power management scheme that supports the advanced
configuration and power interface (ACPI), which allows for maximum power
conservation and maximum performance at the same time. Windows handles all
power-saving chores for your computer.
To Next Page
Loading...
Need help?
General