How to adjust the Acer AWX1908 Projector image size?
To resolve an image that is too small or too large on your Acer projector: * Adjust the zoom lever on the top of the projector. * Move the projector closer to or further from the screen. * Press 'MENU' on the control panel or remote, navigate to 'Image' > 'Aspect Ratio', and experiment with different settings.
What to do if no image appears on Acer Projector?
If no image appears on the screen when using the Acer projector: * Ensure all cables are correctly connected as described in the 'Getting Started' section. * Check that none of the connector pins are bent or broken. * Verify that the projector is switched on.
Why is my notebook computer screen not displaying on Acer AWX1908 Projector?
If the screen of your notebook computer is not displaying your presentation on the Acer projector: * For Microsoft® Windows® notebooks: Some PCs deactivate their screens when a second display is used. Refer to your computer's manual for reactivation instructions. * For Apple® Mac® OS notebooks: Open Display in System Preferences and turn Video Mirroring 'On.'
Why does my Acer AWX1908 lamp burn out or make a popping sound?
If the Acer projector lamp burns out or makes a popping sound, it means the lamp has reached the end of its life. The projector will not turn on until you replace the lamp module. Contact your local dealer or an Acer service center to replace the lamp.
How to fix slanted sides on Acer Projector image?
To fix slanted sides on the Acer projector image: * Try to center the projector on the screen, positioning it below the screen's bottom edge. * Use the Keystone correction keys on the control panel or remote to square the image. * Access the OSD menu by pressing 'MENU'. Then, go to 'Image' > 'Auto Keystone' or 'Image' > 'Manual Keystone' to adjust the image.
How to fix out of focus image on Acer Projector?
To correct an out-of-focus image on your Acer projector: * Adjust the focus ring on the projector lens. * Ensure the projection screen is within the required distance.
What to do if Acer Projector stops responding to all controls?
If the Acer projector stops responding, try the following: * Turn off the projector, unplug the power cord, and wait at least 30 seconds before plugging it back in. * Ensure the control panel lock function is disabled.
How to correct a reversed image on Acer Projector?
If the Acer projector image is reversed, go to 'Image' > 'Projection Mode' or 'Image' > 'Projection Location' on the OSD and adjust the projection direction.
How to fix vertical flickering bar on Acer AWX1908?
If the Acer projector image has a vertical flickering bar, use the 'Frequency' setting to make an adjustment. Also, check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
How to resolve unstable or flickering image on Acer AWX1908 Projector?
To resolve an unstable or flickering image on your Acer projector, use the 'Tracking' setting to correct it. You can also try changing the display color setting on your computer.
Guide to safe and proper use of electrical power for the projector.
Instructions and conditions for when professional servicing is required.
Lists all items included in the projector package for user verification.
Visual and descriptive layout of the projector's front, upper, and rear sides.
Diagrams and instructions for connecting various devices to the projector.
Step-by-step guide for powering the projector on and off safely.
How to adjust the height and angle of the projected image using adjustment wheels.
Accessing and using the OSD installation menu for setup and maintenance.
Navigating and utilizing the projector's onscreen display menus for settings.
Adjusting picture quality including color, brightness, contrast, and image parameters.
Enabling and configuring 3D display functionality and related settings.
Common image problems and solutions for PC and notebook connections.
Technical details including projection system, compatibility, weight, and dimensions.
FCC, Canadian, and other regulatory compliance and safety information.
General| Native Resolution | WXGA (1280 x 800) |
|---|---|
| Display Technology | DLP |
| Projection Technology | DLP |
| Lamp Life | 10, 000 hours (Eco) |
| Zoom Ratio | 1.1x |
| Keystone Correction | Vertical: ±40 degrees |
| Input Ports | HDMI, VGA, Audio in |
| Projection Size | 30" - 300" |
| Noise Level | 32 dBA (Standard), 24 dBA (ECO) |
| Inputs | HDMI, VGA, Audio in |
| Outputs | Audio out |
To Next Page
