What happens when the Acer Projector lamp burns out?
When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, contact your local dealer or Acer service center.
What to do if no image appears on Acer AWX1902 Projector?
If no image appears on the screen when using the Acer projector: * Ensure all cables are correctly connected as described in the 'Getting Started' section. * Check that none of the connector pins are bent or broken. * Verify that the projector is switched on.
Why is my notebook computer screen not displaying on Acer Projector?
If the screen of your notebook computer is not displaying your presentation on the Acer projector: * For Microsoft® Windows® notebooks: Some PCs deactivate their screens when a second display is used. Refer to your computer's manual for reactivation instructions. * For Apple® Mac® OS notebooks: Open Display in System Preferences and turn Video Mirroring 'On.'
What to do if Acer AWX1902 Projector image is too small or too large?
To adjust the image size on your Acer Projector, use the zoom lever on the top of the projector. You can also move the projector closer to or further from the screen. Alternatively, press "MENU" on the control panel or remote, go to "Image" > "Aspect Ratio", and try different settings.
Why does my Acer AWX1902 lamp burn out or make a popping sound?
If the Acer projector lamp burns out or makes a popping sound, it means the lamp has reached the end of its life. The projector will not turn on until you replace the lamp module. Contact your local dealer or an Acer service center to replace the lamp.
How to correct vertical flickering bar on Acer AWX1902 Projector image?
To correct a vertical flickering bar on your Acer Projector image, use the "Frequency" setting to make an adjustment. Also, check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
How to fix unstable or flickering image on Acer AWX1902?
To fix an unstable or flickering image on your Acer Projector, use the "Tracking" setting to correct it. You can also try changing the display color setting on your computer.
How to fix Acer AWX1902 image with slanted sides?
To correct an Acer Projector image with slanted sides, reposition the projector so that it is centered on the screen and below the bottom of the screen, if possible. You can also use the Keystone correction keys on the control panel or remote control until the image becomes square. Alternatively, press "MENU" to open the OSD menu and go to "Image" > "Auto Keystone" or "Image" > "Manual Keystone" to make adjustments.
Why is my Acer AWX1902 image stretched when playing widescreen DVD?
If the Acer projector image is stretched when displaying a widescreen DVD title: If you are playing a 4:3 format DVD, change the format to 4:3 using the projector's OSD. If the image remains stretched, adjust the aspect ratio on your DVD player to 16:9 (wide).
How to fix vertical flickering bar on Acer Projector?
If the Acer projector image has a vertical flickering bar, use the 'Frequency' setting to make an adjustment. Also, check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
Procedures for safely powering down the projector before cleaning operations.
Visual guide and instructions for connecting various devices to the projector.
Step-by-step instructions for powering on the projector and its source devices.
Procedures for correctly shutting down the projector and its components.
Tables and diagrams showing how to achieve desired image sizes by adjusting distance and zoom.
General| Display Technology | DLP |
|---|---|
| Projection Technology | DLP |
| Native Resolution | WXGA (1280 x 800) |
| Keystone Correction | +/-40° (Vertical, Manual & Auto) |
| Input Ports | HDMI |
| Output Ports | PC Audio (Stereo mini jack), VGA (D-sub) |
| Projection Distance | 1.0 m ~ 10.0 m (3.3' ~ 32.8') |
To Next Page
