22
5.2. Do factory reset in user menu.
(1)Restart the monitor after open factory menu. And then open the user menu.
(2)Factory reset will turn off “Burn in” mode which screen color switches among red, green, blue and black.
6. Troubleshooting.
6.1. Can’t Entry ISP Mode!!
(1) Check the cables and ISP JIG are connected fluently.
(2) Click the “Dis Con” and click “Connect” again.
(3) AC off the monitor for a while and retry it.
(4) Change other vervion ISP program.
(4)Change ISP JIG or cable.
(5)Change PC.
To Next Page
Loading...
