Acer B246HL - Page 10

ACER B246HL
10
S6
Disassemble the MF from
panel.
Tear off the tapes, take out the Panel and the CTRL BD of the MF
S7-1
Disassemble I/F BD, P/BD
and SPK from SHD.
Unlock all screws.
Disassemble the I/F BD from the SHD and extract the P/BD wire.
Extract the FFC LVDS from the I/F BD.
Disassemble the P/BD from the SHD.
Disassemble SPK.
PICTURE 1 PICTURE 2
S7-2
Disassemble the USD BD,
I/F BD,P/BD and SPK from
SHD.
(This step is only for SKU
with USB)
Unlock all screws from the PCBA as the picture
Disassemble the USB BD from the SHD and extract the wire from the USB BD.
Disassemble the I/F BD from the SHD and extract the P/BD wire. Extract the FFC
LVDS from the I/F BD. Disassemble the P/BD from the SHD.
NOTE: Circuit boards >10 cm² has been highlighted with the yellow rectangle as above image shows.
Please detach the Circuit boards and follow local regulations for disposal.
USB BD
I/F BD
P/BD
P/BD
I/F BD