Acer B246HL

ACER B246HL
11
4.2 Assembly Procedures
Preparation before assemble:
1.Clean the room for work
2.Identify the area for material
3.Prepare the implement, equipment, materials as bellow：
1) working table
2) Screw-driver
3) Knife
4) glove
5) cleaning cloth
6) ESD protection
After unplugging the power cord, the power board still have power energe. Please pay attention when
disassembling/assembling Power BD.
S1-1
Assemble the MAIN board,
power board and SPK.
Insert the FFC to the I/F.
Insert the DP-Wire to the I/F BD and the Power BD.
Insert the Power BD-Wire and SPK-Wire to I/F BD,
Place the I/F BD and the Power BD onto main SHD and lock all screws.
Put Mylar on the Power BD.
S1-2
Assemble the MAIN board,
power board, USB board
and SPK.
(This step is only for SKU
wih USB)
Insert the FFC to the I/F. Insert USB-I/F BD wire to the IF/BD
Insert the DP-Wire to the I/F BD and the Power BD.
Insert the Power BD-Wire and SPK-Wire to I/F BD,
Place the I/F BD, the Power BD and USB BD onto main SHD and lock all screws.
Put Mylar on the Power BD.
USB BD
I/F BD
P/BD
I/F BD
P/BD
I/F BD
P/BD
P/BD