Acer B246HL - Page 12

ACER B246HL
12
S2
Assemble the ASSY TRIM
Insert the C/B-FFC to C/B as circle frame, and insert them into the BZL
Assemble the panel on the BZL
Stick Mylar on C/B FFC as square frame and Insert the C/B-FFC to the PCBA as
circle frame.
PICTURE 1 PICTURE 2
S3
Assemble the lamp wire
Insert the big connector of the lamp wire to the P/BD .
Stick 2 tape to fasten the lamp wire and one AL-Tape on SHD as the picture.
S4
Assemble LVDS cable
Insert the LVDS cable to the Panel, and stick one tape on LVDS cable.
S5
Assemble SHD
Lock the Hexagonal screws and the DP screw as picture 1.
PICTURE 1