17
3.7 Successful upgrade. When upgrade successful, there will be green Pass letter appearing.
4. Check the FW version after upgrade.
4.1. The way to open factory menu.
(1) Connect VGA source to monitor and turn it on.
(2)The way to factory menu: Pressing “e” and DC on, when the screen lights, release the key and press “MENU” again
to open the menu with “F” and select “F” to open factory menu.
(3)Do “Auto Color” in factory mode.
Scr: C:\AOC_ACER B246HYL_TSUMPO88CDT9_1A1H1DP.bin
Check this
F/W version.
To Next Page
Loading...
