Acer BL280K - Page 20

English
Installation
1. 󰀨
2. 

Then tighten the thumbscrews on the signal cable connector.
3. 
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4. 
the audio cable.
 Insert the monitor power cable into the power port at the back of the monitor.
6. Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.
USB
USB
Note: Audio output is only for audio output model. Please check user manual for more instruction.

*For the installation of replaceable parts, please refer to the above installation instructions.

For local service centers and service contacts, please refer to https://www.acer.com/ac/en/US/content/support