EN-22
9. PIP/PBP: The options for PIP/PBP Mode are Off, PIP Large, PIP Small, and
PBP. You can also adjust the PIP Position, Sub Source, Source Swap, and
Audio Source.
10. Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2.
11. DDC/CI: Allows the monitor settings to be set through the software on
the PC.
12. Quick Start Mode: Enable monitor rapidly.
13. Power-off USB charge: Turn On or Off.
Product information
1. From any function page, press to open Information page.
2. Reset All Settings: Reset all settings to the factory defaults.
To Next Page
Loading...
