Acer CB242Y - Performance and OSD Settings; Performance Options; OSD Menu Configuration

English
Performance
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to
the right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to control functions.
4. Over Drive: Select Off, Normal or Extreme.
5. FreeSync:To choose FreeSync on/off.
6. Refresh rate num: Display the panel’s current refresh rate on the screen.
Note: If FreeSync set "On" you can see the V Frequency to changes in the OSD.
OSD
Mode - Standard
10
English
System
OSD Timeout
Picture
Color
Language
Audio
OSD
Off
Off
Transparency
OSD Lock
Enter
Move
X
Performance
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the
right to
navigate to the element you wish to adjust and press the joystick to enter it.
VRB: When VRB is set to Normal or Extreme, the dynamic picture fine lines will
become more clearly, but the brightness will be reduced, and default will be "Off".
VRB Setting
VRB and FreeSync cannot be enabled at the same time. If FreeSync
turned on, then VRB will be "Off".
When VRB is “On”, Brightness, Blue Light and ACM cannot be adjusted
unless it is “Off”.
VRB is enabled when Input Timing = 75Hz. If Input Timing <75Hz, VRB
is grayed out and disabled.
Mode - Standard
OSD
System
Picture
Color
Over Drive
Audio
Normal
Off
Enter
Move
X
Performance
Off
Refresh Rate Num
Off
V RB
F reeSync