Need help?Do you have a question about the Acer CBA242Y and is the answer not in the manual?
Read these instructions carefully. Keep this document for future reference.
Please carefully follow these guidelines when cleaning the monitor.
Observe guidelines for connecting and disconnecting power from the LCD monitor.
Guidance on power outlet accessibility and disconnecting power from equipment.
Instructions to protect hearing by adjusting volume levels and listening duration.
Important warnings regarding product safety, placement, and electrical hazards.
Guidelines for operating the monitor safely with electrical power sources.
Safety precautions for using the monitor in areas with potentially explosive atmospheres.
General safety advice, including keeping small parts away from children.
Information on Acer's commitment to environmental protection and equipment recycling.
Guidelines for properly disposing of the electronic device and recycling.
Explanation of the LCD unit's pixel manufacturing and potential minor imperfections.
Adjust monitor angle, use footrest, or adjust sitting height for maximum comfort.
Rest eyes frequently, take breaks, and blink often to prevent dryness.
Keep display clean, adjust brightness/contrast for readability.
Develop habits like breaks, stretching, and fresh air for productivity.
Adjust the tilt angle of the monitor for optimal viewing position.
Adjust the height of the monitor after pressing the top of the monitor.
Rotate the display to the utmost degree until it stops at 90 degrees.
Swivel the monitor using the built-in pedestal for the most comfortable viewing angle.
Important safety precautions to prevent damage and ensure safe operation of the monitor.
Guidelines for safely cleaning the monitor screen and cabinet.
Information on how the monitor enters power saving mode and its indicators.
Explanation of DDC protocol for Plug and Play compatibility and monitor capability reporting.
Details monitor's base controls: power, hotkeys, input, and navigation.
Default functions for buttons, OSD main page, and mode selection.
From any function page, press to open the Modes control and select which user-defined profile to use.
Open the Brightness control and select the brightness setting using the Navi/OK button.
Open the Input control and select the desired input, or toggle Auto Source.
To Next Page
General
