1-4 Disassembly Procedures
Pre-disassembly Instructions 0
Do the following prior to starting any maintenance procedures:
1. Place the system on a stable work surface.
2. Remove the power adapter from the USB Type-C port (A or B) as shown in Figure 1-1
or Figure 1-2.
Figure 1-1. AC Adapter Outlet
3. Remove all cables from system.
4. Remove the microSD card from the microSD card slot (C) (Figure 1-2).
Figure 1-2. AC Adapter Outlet and MicroSD Card Removal
Make sure the system is completely powered off.
To Next Page
Loading...
