Acer CP514-1H - LCD Module Removal

Disassembly Procedures 1-15
LCD Module Removal 0
Prerequisite:
Battery Pack Removal
1. Detach the transparent tape (A) securing the G-sensor cable. Then disconnect the
G-sensor cable from the mainboard connector (Figure 1-15).
2. Unroute the G-sensor cable from the cable guide (B) (Figure 1-15).
Figure 1-15. LCD Module Removal
3. Disconnect the eDP cable from the mainboard connector (C). Then unroute it from
the cable guide (Figure 1-16).
Figure 1-16. LCD Module Removal
A
B
C