What to do if Acer D1P1704 Projector image freezes displaying photo or document?
If the image hangs up when displaying a photo or document in Media on your Acer Projector, power off the projector and then power it on again.
How to fix vertical flickering bar on Acer Projector image?
If your Acer Projector image has a vertical flickering bar: * Use "Frequency" to make an adjustment. * Check and reconfigure the display mode of your graphics card to make it compatible with the projector.
How to stabilize flickering image on Acer Projector?
If the image from your Acer Projector is unstable or flickering: * Adjust the "Tracking" to correct it. * Change the display color depth settings on your computer.
Why is Acer Projector image partial or scrolling from notebook?
If your Acer Projector displays a partial, scrolling, or incorrectly displayed image from notebooks, follow these steps for an incorrectly displayed image: * Follow the steps for item 2 to adjust the resolution of your computer. * Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5] * If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
Why is my Acer D1P1704 Projector image out of focus?
To correct an out-of-focus image on your Acer Projector: * Ensure that the lens cap is removed. * Adjust the focus ring on the projector lens. * Make sure the projection screen is within the required distance of 3.3 to 29.7 feet (1.0 to 9.1 meters) for XGA series / 3.3 to 25.2 feet (1.0 to 7.7 meters) for WXGA series / 3.3 to 24.6 feet (1.0 to 7.5 meters) for 1080p series / 3.3 to 24.0 feet (1.0 to 7.3 meters) for WUXGA series from the projector.
Why does my Acer D1P1704 lamp burn out or pop?
When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this occurs, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section.
How to adjust image size on Acer Projector?
To adjust the image size, try the following: Adjust the zoom ring on the projector; move the projector closer to or further from the screen; or press "MENU" on the remote control, navigate to "Image - -> Aspect Ratio", and experiment with different settings. You can also directly press "RATIO" on the remote control.
Why is Acer D1P1704 Projector image stretched with widescreen DVD?
When you play a DVD encoded in anamorphic or 16:9 aspect ratio, you may need to adjust the following settings: If you play a 4:3 format DVD title, change the format to 4:3 in the projector OSD. If the image is still stretched, adjust the aspect ratio and set up the display format to 16:9 (wide) aspect ratio on your DVD player. If you play an Letterbox (LBX) format DVD title, change the format to Letterbox (LBX) in the projector OSD.
How to remove vertical flickering bar on Acer D1P1704?
Use "Frequency" to make an adjustment; refer to the "Image" section for more details. Also, check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
How to stabilize a flickering image on Acer Projector?
Adjust the "Tracking" to correct the flickering. You can find more information in the "Image" section. Also, try changing the display color depth settings on your computer.
Covers product shutdown, power connection, accessibility, and general warnings.
Further safety measures and precautions for projector use to prevent injury or damage.
Key technical specifications and capabilities of the projector.
Visual identification of projector parts and rear side ports.
Description of buttons and indicators on the projector and its remote control.
Guide to connecting various devices to the projector using different cables.
Steps to power on the projector and select an input source.
Method for adjusting the projector's height using its feet.
Tables and diagrams for achieving optimal image size based on distance.
Guide to achieving desired image size using projector position and zoom.
Features for optimizing image appearance, color balance, and brightness.
Settings for image orientation, position, scaling, distortion, and sharpness.
Setup for projector security features like passwords and timeouts.
Solutions for common issues, OSD messages, and general projector problems.
To Next Page
General
