Acer D4K2106 - System Settings; General Settings (Source, Power); Gaming and Refresh Rate Settings

20
English
Setting
Note: Functions vary depending on model definition.
Source Selection Manual by source menu, Auto by Smart Detection.
Power Mode
(Standby)
Default is "Off" to disable this function. Choose "On" to support
Smart standby function.
HDMI CEC Default is "Off". Choose "On" to enable HDMI CEC function.
Test Pattern Default is "Off" to disable this function. Choose "On" to enable
test pattern for installation.
Gaming Refresh Rate
HighFrame Rate:
High Frame Rate support High Frame Rate timing(1080p240Hz)
Variable Refresh Rate:
Enable VRR function. Support AMD Freesync and NVIDIA G-sync
compatible Variable Refresh Rate support 1080p144Hz timing.
Refresh Rate Num
Default is "Off". Choose "On" to enable Refresh Rate Number OSD
on upper right coner.
Aim Point
Default is "Off". Choose "On" to enable Aim Point OSD.
Information Display the projector information for Model Name, Input Source,
Signal Type, Display Mode, Serial No., Software Version and QR
code on the screen.
Scan QR code linking to Acer projector portal via mobile.
Reset Press the "ENTER" button and choose "Yes" to return the
parameters on all menus to the factory default settings.