To Next PageTo Next PageWhat to do if Acer DSV1725 stops responding to all controls?
If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. Make sure that the control panel lock function is disabled.
How to fix partial, scrolling, or incorrectly displayed image on Acer DSV1725 Projector (for notebooks)?
Follow the steps to adjust the resolution of your computer. Press the toggle output settings. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
Why is Acer DSV1725 Projector image too small or too large?
Adjust the zoom ring on the projector. Move the projector closer to or further from the screen. Alternatively, press "MENU" on the remote control, go to "Image - -> Aspect Ratio", and try different settings, or press "RATIO" on the remote to adjust directly.
How to fix unstable or flickering image on Acer DSV1725?
Adjust the "Tracking" to correct the image. Change the display color depth settings on your computer.
Why is my Acer DSV1725 Projector image stretched when displaying a widescreen DVD?
When playing a DVD encoded in anamorphic or 16:9 aspect ratio, you may need to adjust settings. If you play a 4:3 format DVD title, change the format to 4:3 in the projector OSD. If the image remains stretched, adjust the aspect ratio to 16:9 (wide) on your DVD player. For a Letterbox (LBX) format DVD title, change the format to Letterbox (LBX) in the projector OSD.
What to do if Acer DSV1725 Projector image is out of focus?
First, make sure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, ensure the projection screen is within the required distance from the projector.
Why is the image too small or too large on my Acer Projector?
If the image from your Acer Projector is too small or too large, here are a few things you can try: * Adjust the zoom ring on the projector. * Move the projector closer to or further from the screen. * Press 'MENU' on the remote, go to 'Image - -> Aspect Ratio' and try different settings, or press 'RATIO' on the remote to adjust directly.
How to fix Acer DSV1725 Projector when LAN/WiFi, USB Display source show No signal?
Power off projector and power on again.
General| Display Technology | DLP |
|---|---|
| Brightness | 4000 lumens |
| Projection Size | 30" to 300" |
| Lamp Life | 10000 hours (Eco) |
| Inputs | HDMI, VGA, USB, Audio |
| Outputs | VGA, Audio |
| Aspect Ratio | 16:9 |
Instructions for safe cleaning and power disconnection.
Guidelines for safe and correct electrical usage.
Instructions on when and how to seek professional servicing.
Avoid looking into the lens; avoid hazardous environments.
Follow operating tips, avoid dropping, and follow mounting rules.
Safety guidelines for lamp replacement and component handling.
Important warnings and safety measures for projector operation.
Instructions for safely cleaning the projector lens.
Overview of the projector's key capabilities and technologies.
Covers connection, power, image adjustment, and menus.
Explains status indicators, error codes, and LED messages.
Procedures for lamp replacement and ceiling mounting.
Technical details and supported modes.
Table showing desired image sizes, distances, and zoom ratios.
Common image display issues and their solutions.
Fixes for notebook display issues and image flickering.
Solutions for projector unresponsiveness or lamp issues.
Instructions for lamp replacement by qualified personnel.
Notices regarding FCC and Canadian ICES-003 compliance.
