Acer G195W - Connecting the Power Cord; Safety Precautions; Cleaning Your Monitor

Acer Acer –LCD-G195W
7
7.0mA (Typ.)
7.5mA (Max.)
CCFL startup voltage
≧1700 Vrms (0˚C)
Operating frequency 40~60KHz
Protect delay time > 1 second
Efficiency ≥70% (Using dummy load)
Note: Other panels please refer to the reference panel specs.
3.2 Brightness output
The test to verify specifications in this section shall be performed under the following standard conditions unless otherwise
noted.
Temperature : 25 ± 5°C
Test pattern : white
Video Resolution : 1366 x 768
Video input level : 700 mV ± 2%
Warm-up time : 30 minutes
LCD Module BL
INL: MT185GW01 V.0
≥250 cd/m
2
Set brightness control and also contrast control at maximum, to measure the screen center, the light output shall ≥ BL cd/m
2
(as panel spec).If phase in other second panel, pls refer to the panel spec.
3.3 White balance
The test standard conditions refer to Sec 3.3.(Brightness control is at 100 contrast control is at 50 )
Chromaticity Coordinate
Mode
x y
Cool
9300K 0.283 ± 0.030 0.297 ± 0.030
Warm
6500K 0.313 ± 0.030 0.329 ± 0.030
User
Panel While x Panel While y
3.4 Brightness uniformity
The test standard conditions refer to Sec 3.3.
%
≥
75
)(backlight points nine of luminance Max.
)(backlight points nine of luminance Min.