84
6.11 GPS----GPS Test
If the screen shows ―GPS close‖ when entering into this test, tester automatically opens GPS and runs
the test.
This test needs to search positioning satellite signals, so tester needs to test outdoors.
This test is to check the GPS’s function. After entering into the test, the screen will show green words
―GPS Test Pass‖ if GPS signals can be searched(at least three satellite signals can be searched, and at
least C/N count of one satellite signals is more than 33.)
After the test is done, click on ―Pass‖ or ―Fail‖ button to exit the test. Test result will be automatically
written into ―/sdcard/Factory/Diagnostic/ _TestResult.txt‖.
To Next Page
Loading...
