Using the camera and camcorder - 37
In the camera window, the controls at the top of the screen allow you
to change settings. The controls at the bottom allow you to take a
picture, select camera or camcorder, zoom in or out, and view the last
picture/video taken.
Tap the Camcorder button and the camcorder immediately begins
filming. While recording, you are unable to access camera/camcorder
settings. Tap the red Stop recording button to stop filming.
Settings
Icon Description
Settings
Camera settings
• Capture mode: Normal or Panorama.
•
Scene mode: None, Beach, Candle light, Fireworks,
HDR, Landscape, Night, Night portrait, Party, Portrait,
Snow, Sports, Steady photo, Sunset or Theatre.
• Resolution: 5M pixels, 3M pixels or 2M pixels.
• Exposure: Over- or under-exposes the image.
• White balance: Auto, Day light, Cloudy, Fluorescent
lamp or Incandescent.
• Timer: Off, 2 seconds, 5 seconds or 10 seconds.
• Grid: Turns the grid on or off.
Camcorder settings
• Resolution: HD 720p, SD 480p or QCIF.
•
Timer lapse interval: Off, 1 second, 2 seconds, 5
seconds or 10 seconds.
General settings
• Location: Set if the location (from GPS) is stored in the
ima
ge information. A satellite icon appears on the
screen when active.
• Storage: Internal storage or SD card.
• Reset to default: Return camera settings to the original
conditions.
Effects
• None, Aqua, Blackboard, Mono, Negative, Sepia or
White board
To Next Page
Loading...
