Settings
Open the Settings menu as described in the OSD navigation section. This menu provides
the following settings:
Wide mode
Press to toggle scaling mode between 4:3, 16:9 and different Letterbox modes (1, 2, 3).
Wide Detect is also available when viewing SD content over digital TV, HDMI and SCART
signals.
HDMI scan info
Use this setting to adjust the size of the image if you are using a HDMI connection.
Menu language
Set the language displayed for the OSD menus.
Sleep
You can set a time delay, after which the monitor will turn off. The delay can be 15, 30,
45, 60, 90 or 120 minutes.
Intelligent zapping
If Intelligent Zapping is on, then channels viewed for a short period will not be added to
the zapping memory.
Zapping timeout
If Intelligent Zapping is active, this sets the delay before a channel is added to the
zapping memory.
Reset settings
Return all settings to default values, removing any changes.
To Next Page
Loading...
Need help?
General
