Acer n20 - Bottom View; Preparing to Use Your Acer N20

1 Getting started
Preparing to use your Acer n20
8
Bottom view
Preparing to use your Acer n20
Perform first the following easy setup tasks to begin using your
handheld:
• Install the Microsoft
®
ActiveSync
®
software in your
computer
• Install the battery pack
• Connect the cradle
• Charge your handheld
• Set up your handheld
No. Component Description
1 Acer Versatile
Connector
Connects your handheld to the cradle,
which in turn connects to the back of your
computer and through the AC adapter to
the wall current. This allows you to
recharge your handheld and perform an
ActiveSync operation. You can also use it to
connect peripheral hardware devices, such
as an external keyboard, to your handheld.
2 Battery
release switch
Unlatch to detach the removable battery
pack from its bay.
3 Battery bay Houses the handheld’s battery pack.