1 Getting started
Preparing to use your Acer n20
13
Charging your Acer n20
For initial use, you need to charge your handheld for three
hours. After that, you can charge it for a few minutes each day
to recharge the battery to full capacity. Normally, you can use
your handheld for eight straight hours of operation before you
need to recharge the battery.
To charge your handheld
You use the cradle to charge your handheld.
Connect the AC adapter connector to the power socket at the
back of the cradle, then plug the other end of the AC adapter
into any AC current outlet.
Insert your handheld into the cradle. The bottom edge of your
handheld should align smoothly with the cradle when it is
inserted properly.
To Next Page
Loading...
