1 Getting started
Preparing to use your Acer n20
16
This wizard will help you:
• Set up a partnership so you can synchronise information
between your handheld and your computer
• Customise your synchronisation settings
To perform the first synchronisation process
1 Connect the cradle.
For instructions, refer to page 12.
2 Insert your handheld in the cradle.
The bottom edge of your handheld should align smoothly with
the cradle when it is inserted properly.
3 Plug the cradle’s USB connector into a USB port on your
computer.
The 'New Partnership' setup wizard will automatically start on
your computer screen.
NOTE: If the wizard does not automatically appear, launch
ActiveSync on your computer by clicking on its icon from
Start > Programs.
4 Follow the onscreen instructions.
To Next Page
Loading...
