Acer Switch 3 User Manual

22 - Recovery
RECOVERY
If you are having trouble with your computer, and the frequently asked
questions (see Got a question? on page 60) do not help, you can
recover your computer.
This section describes the recovery tools available on your computer.
Acer provides Acer Care Center, which allows you to reset your PC,
refresh your PC, or create a factory default backup.
Creating a factory default backup
Backup allows you to quickly and easily back up your operating
system, installed apps and data.
1. From Start, select All apps then Acer. Select Acer Recovery
Management in the list of Acer apps.
Note
Acer Care Center is only available with a pre-installed Windows operating
system.
Important
We recommend that you create a Factory Default Backup as soon as
possible. In certain situations a full recovery will require a USB
recovery backup.
Note
Since the recovery backup requires at least 8 GB of storage after formatting,
it is recommended to use a USB drive with a capacity of 16 GB or larger.

Acer Switch 3 Specifications

General

Display Size	12.2 inches
Resolution	1920 x 1200 pixels
Processor	Intel Pentium N4200
RAM	4GB
Storage	64GB eMMC
Operating System	Windows 10 Home
Battery Life	Up to 8 hours
Graphics	Intel HD Graphics 505
Battery	2-cell Li-Ion
Connectivity	802.11ac Wi-Fi, Bluetooth 4.0
Ports	1 x USB 3.0, 1 x USB-C, microSD card reader, headphone/microphone combo jack