Acer Switch 3 User Manual

30 - Using a Bluetooth connection
3. Select the device you wish to pair from the list of discovered
devices, and select Pair.
4. A code displays on your computer, which should match the code
displayed on your device. Select Yes. Then, accept the pairing from
your device.
You can also enter the Bluetooth settings by selecting the
Notifications icon in the lower right-hand corner of the screen to open
the Notifications pane. From here, you can enable or disable
Bluetooth or right-click on Bluetooth > Go to settings to enter the
Bluetooth settings.
Note
Some devices using older versions of the Bluetooth technology require both
devices to enter a PIN. In the case of one of the devices not having any inputs
(as in a headset), the passcode is hardcoded into the device (usually "0000"
or "1234"). Consult your device’s user manual for more information.

Acer Switch 3 Specifications

General

Display Size	12.2 inches
Resolution	1920 x 1200 pixels
Processor	Intel Pentium N4200
RAM	4GB
Storage	64GB eMMC
Operating System	Windows 10 Home
Battery Life	Up to 8 hours
Graphics	Intel HD Graphics 505
Battery	2-cell Li-Ion
Connectivity	802.11ac Wi-Fi, Bluetooth 4.0
Ports	1 x USB 3.0, 1 x USB-C, microSD card reader, headphone/microphone combo jack