Chapter 3 53
Removing the Front I/O and Card Reader Boards
1. See “Removing the Side Panel” on page 34.
2. See “Removing the Font Bezel” on page 35.
3. See “Removing the Heat Sink Fan Assembly” on page 36.
4. See “Removing the Processor” on page 38.
5. See “Removing the Optical Drive” on page 40.
6. See “Removing the Hard Disk Drive” on page 42.
7. See “Removing the Memory Modules” on page 49.
8. Disconnect one end of the three USB (1, 2, and 4), audio (2), and 1394 (5) cables from the rear of the I/O
and card reader boards.
To Next Page
Loading...
