Note:
You will see a sequence fault if not started in neutral this code will clear as soon as you put the car in neutral.
The vehicle will possibly give you a cut back code. When the vehicle gets low on power it will automatically cut
back, this is a safety precaution to protect the motor and controller.
In many cases the fault is just a warning.
For example:
Thermal cut back just means the motor is too hot and will reduce the power to protect the motor.
Push the center arrow button [8 ] once, this will get you back to main screen
Copyright © 2009-2013 American Custom Golf Cars, Inc. Page 9
To Next Page
Loading...