ACHATE MS-100 - Product Component Name and Schematic Diagram

12 13
PRODUCT COMPONENT NAME AND SCHEMATIC DIAGRAM
1. Sort the miscellaneous in the cleaning area before cleaning the product.
2. Besuretoinstallthecleaningclothforthersttimewhenusingtheproduct.
3. When adding water to the product, do not add chemicals such as detergent,
perfume, essential oil, etc. to avoid damaging electrical materials.
 Itisrecommendedtoaddthepuriedwaterifthewaterhardnessishigh.
4. Clean the product with a dry and soft duster: Do not clean the surface of the product with ethyl
alcohol, benzene, thinners and other solutions to avoid damaging the appearance of the
product
5. Store the product in a dry and ventilated indoor environment.
6. Remove the cleaning cloth before storing the product to prevent damage to the machine from
prolonged installation of a damp cleaning cloth on the head of the steam mop.
7. Theproductcandischargethesteam1minutelaterfortherstuseorreuseafterbeingoutof
use for a long time.
8. The product applies to soil that can withstand high temperatures. Do not use unsealed wood
 oorandunglazedceramictiles.
9. Short-term cleaning with a steam mop is not recommended if the ground is polished, waxed,
etc. Plain.
10. Consulttheoormanufacturer’sprecautionsbeforecleaningandmaintainingtheoorto 
avoid unnecessary breakage.
1. Mop head
2. Water tank
3. Display screen
4. Metal tube
5. Control knob
6. Handle
7. Hook drive
8. Fixed leg of metal tube
9. Power cord plug
10. Inlet plug water tank
11. Measuring cup
12. Dust cloth
13. Carpet trolley