4
Sequencer
Modes
The sequencer runs continuously in all six modes.
You can switch between modes while the sequencer is running; the switch
takes place after the last step of the current pattern has been played.
Start/Stop
The Start/Stop button works in every mode and returns the pattern to its starting
point, i.e. step 1 of the current pattern.
When the Miami is synchronized, the Start/Stop signal comes from the MIDI or
Sync-In, and the Start/Stop button is disabled.
Pattern Group
The 12 available pattern groups can be selected with the rotary switch. A
pattern group contains 16 patterns. These are selected with the pattern buttons
(1-16).
To Next Page
Loading...