Do you have a question about the ACIQ ACiQ-18W-WM and is the answer not in the manual?
Details the appliance's intended use and explains warning and caution symbols for safety.
Highlights critical electrical safety measures, including grounding, wiring, and surge protection.
Covers essential safety precautions for installing the unit, including wiring and drilling safety.
Provides safety rules for mounting, ductwork, clearances, handling, and avoiding combustible gases.
Addresses safety considerations for fuses and refrigerant handling by certified technicians.
Lists and illustrates accessories provided with the indoor unit for installation and operation.
Guidance on choosing a suitable location, avoiding hazards, and understanding unit physical dimensions.
Covers unpacking, return air options, wall/frame mounting, and preparation for installation.
Instructions for connecting drainage pipes and air ducts, emphasizing sealing and material notes.
Details on connecting refrigerant pipes, wires, and general wiring precautions.
Procedure for installing the optional electric auxiliary heat module, including wiring and sizing.
Mandatory warnings and precautions for all electrical work, including compliance and power handling.
Step-by-step guide for wiring the indoor unit, including cable prep and terminal connections.
Details specific wiring connections for wired controllers and various 24V thermostat setups.
Explains DIP switch functions, settings, and address configurations for system control.
Steps to prepare for evacuation, emphasizing system cleanliness and proper connection.
Detailed procedure for evacuating the refrigerant circuit using a vacuum pump and manifold gauge.
Confirms proper installation and connection of units, piping, wiring, and system integrity before testing.
Step-by-step guide for performing the test run for both indoor and outdoor units and drainage system.
| Brand | ACIQ |
|---|---|
| Model | ACiQ-18W-WM |
| Category | Air Handlers |
| Language | English |
Loading...