1-
TABLE OF CONTENTS
1. Safety Instruction
2. Technical Specification
3. How To Set The Unit
3.1 Control Panel
3.2 Main Function
4. How To Control The Unit
4.1 Master/slave built-in preprogram function
4.2 Easy controller
4.3 Universal DMX controller
4.4 DMX 512 Configuration
4.5 DMX512 Connection
5. Troubleshooting
6. Fixture Cleaning
18-
1. Make sure the unit does not receive DMX signal.
2. Check if the sound sensitively is too low.
E. One of the channels is not working well
1. The cable connected to the PCB may broken .
6. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater
accumulation of dirt on the unit’s optics.
y Clean with soft cloth using normal glass cleaning fluid.
y Always dry the parts carefully.
y Clean the external optics at least every 20 days. Clean the internal optics at least every
30/60 days.
To Next Page
Loading...
