To Next PageTo Next Page
Need help?Do you have a question about the ACME MH-6616S and is the answer not in the manual?
General| Brand | ACME |
|---|---|
| Model | MH-6616S |
| Category | Light Fixture |
| Language | English |
Key safety precautions for operating and handling the lighting unit to prevent hazards.
Advises against opening the unit or performing self-repairs; contact dealer for service.
Details on securing the unit via mounting holes and ensuring structural support.
Procedure for safely installing or swapping gobos, including warnings and cautions.
Details on beam angle characteristics for different models (MH-6616S, MH-666S) with illustrative charts.
Guidelines for safe lamp replacement, handling high-pressure lamps, and UV radiation risks.
Explains the display, LEDs, and buttons (MENU, DOWN, UP, ENTER) on the control panel.
Procedure to set the DMX512 address for controlling the unit via DMX.
Configuration options for Show modes, Slave modes, and Blackout modes for synchronized operation.
Settings for color modes, pan/tilt inversion, LED display, and display inversion.
Covers focus adjustment, self-test routines, fixture hours display, and system reset.
Instructions for setting up synchronized shows using master/slave configurations.
Guidance on using a universal DMX controller to address and operate the unit.
Detailed mapping of DMX channels to functions (Pan, Tilt, Shutter, Gobo, Color, etc.) for MH-666S.
Covers unit not working, no light, fan issues, and power/fuse checks.
Addresses DMX LED status, address settings, polarity, cable integrity, and interference.
Troubleshooting for units not responding to controllers or sound activation.
Deals with channel failures, stepper motor issues, and intermittent lamp cut-outs.
Step-by-step guide for diagnosing and fixing a broken pan belt on the MH-6616S model.
