CDN-USB
USB
CDNP7ACC / INSPIRO +
INSTRUCTIONS FOR CHANGING LANGUAGES
To enter the installer's menu:
- press the " " button
- within 5 seconds enter
"1507xxxx", where "xxxx" is the four-
digit password of the Installer, which
is factory set to"0000" and must be
changed to its own!
NOTE! In the latest control panels
(soft. ver.:K-15), "0000" has been
replaced by the last four digits of the
product serial number available on the
sticker.
Confirmation of entry
there is a beep in the installer's menu,
the software version appears on the
display and then program number „0":
"Otwie" (Default - Polish) or other
language e.g. „Open”.
soft. ver.: K-14
Press ”79'’ simultaneously to exit the
menu and start the countdown.
After the countdown has been
completed and during the momentary
the "ACO" sign displayed
- press simultaneously the buttons
"456" to set language no. 2
- press simultaneously the buttons
"123" to set language no. 1
soft. ver.: K-15
To change the language just press in
installer’s menu simultaneously the
buttons:
- "456" to set language no. 2
- "123" to set language no. 1
B - using software
https://www.support.aco.com.pl/
1
2
A - from panel (only 2 languages)
Use latest version of x700 software.
Select one of the languages and save settings: „Main unit`s parameters”
Basic set of languages:
Ask your seller for other set of languages.
1 PL
2 EN
3 DE
4 FR
1
2
3
4
Language
Main unit’s parameters
Save settings
Please download the latest version of x700 software from:
To Next Page
Need help?
General
