What to do if there is no flow from Acorn Control Unit valve?
If there's no flow from the Acorn Control Unit valve, make sure the hot and cold supplies are working and the shutoffs are open. Also, inspect and clean the filters, as they might be blocked with debris.
Why Acorn Control Unit does not maintain outlet temperature?
If the Acorn Control Unit does not maintain the outlet temperature or it changes over time, the fluctuation in supply pressures or filters blocked with debris could be the reason. Check the differential temperature between supplies and outlet. Clean the filters.
How to fix discharge temperature too hot or too cold in Acorn Control Unit?
If the discharge temperature of your Acorn Control Unit is too hot or too cold, the valve might not be adjusted properly. Readjust the valve temperature according to the installation instructions.
Why set point is difficult to set in Acorn Control Unit?
If the set point is difficult to set or cannot be reached on your Acorn Control Unit, it could be due to the supply temperatures not being within specified limits, or the hot and cold supplies being reversed. Check the differential temperature between supplies and outlet. Reinstall the valve with supplies connected to marked inlets.
Contact details for technical support and customer service.
Key instructions and reminders for proper installation.
Warranty coverage details for Acorn products in the US and Canada.
Guide for installing the trim components, including handles and escutcheons.
Steps to remove the valve bonnet and external stem for access.
Instructions for inspecting, reversing, and correctly reassembling the valve cartridge.
General| Brand | Acorn |
|---|---|
| Model | SV16 |
| Category | Control Unit |
| Language | English |
To Next Page