ACP XpressChef JET514U - User Manual

1
Service
Commercial High Speed Combination Oven
XpressChef Models
Service Manual
This manual is to be used by qualified
service technicians only. ACP, Inc.
does not assume any responsibility for
property damage or personal injury for
improper service procedures done by
an unqualified person.
16400046
Revision 1
January 2020

Summary

Important Safety Instructions

Precautions to Avoid Possible Exposure to Excessive Microwave Energy

Specific safety measures against microwave energy exposure.

Oven Specifications - 60 hz

Oven Specifications - 60 hz Korean Models

Oven Specifications - 60 hz 3 Phase - Taiwan

Oven Specifications - 50 hz Single Phase

Oven Specifications - 50 hz 3 Phase

Installation

Unpacking Oven

Instructions for unpacking and inspecting the oven.

Radio Interference

Guidance to minimize radio interference from microwave operation.

Oven Placement

Recommendations for optimal oven positioning and environment.

Oven Clearances

Required spacing around the oven for proper ventilation.

Quick Start Reference

Component Testing

Service Mode

Updating Firmware

Alternate Method

An alternative procedure for updating the oven's firmware.

Power Output Test

Wiring and Schematic Diagrams

ACP XpressChef JET514U Specifications

General

Model	JET514U
Category	Oven
Power	Electric
Frequency	60 Hz
Phase	Single
Jet Plate	Yes
Material	Stainless Steel
Timer	Yes
Voltage	208-240 V
Cooking Modes	Convection, Microwave
Features	USB Programmability
Frequency (Hz)	60 Hz
Door Style	Pull Down