EasyManua.ls Logo

ACP XpressChef Series - User Manual

ACP XpressChef Series
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Service
Commercial High Speed Combination Oven
XpressChef Models
Service Manual
This manual is to be used by qualified
service technicians only. ACP, Inc.
does not assume any responsibility for
property damage or personal injury for
improper service procedures done by
an unqualified person.
16400046
Revision 1
January 2020
Question and Answer IconNeed help?

Do you have a question about the ACP XpressChef Series and is the answer not in the manual?

Summary

Important Safety Instructions

Microwave Energy Exposure Precautions

Precautions to avoid possible exposure to excessive microwave energy.

General Safety Guidelines

Oven Specifications - 60 Hz

Oven Specifications - 60 Hz Korean Models

Oven Specifications - 60 Hz 3 Phase Taiwan

Oven Specifications - 50 Hz Single Phase

Oven Specifications - 50 Hz 3 Phase

Installation

Unpacking and Initial Setup

Instructions for unpacking the oven and initial setup procedures.

Oven Placement and Clearances

Guidelines for proper oven placement, including airflow and clearance requirements.

Quick Start Reference

Preheat Temperature and Manual Cooking

Setting preheat temperature and using manual cooking modes.

Recipe Management

Steps for editing or creating cooking recipes.

User Options and Cleaning

Oven Construction

Blower Motor, Touch Panel, Transformer Diagrams

Diagrams illustrating the blower motor, touch panel, and transformer.

Door and Door Handle Assembly Diagrams

Diagrams showing the door and door handle components.

Electronics and Power Components Diagrams

Diagrams of HV board, relay board, and capacitors.

Motor and Heating Components Diagrams

Diagrams of interlock, convection motor, and heater box.

Power Entry Components Diagrams

Diagrams of lower access panel, fuse, and line filter.

Magnetron and Sensor Components Diagrams

Diagrams of magnetrons, stirrer system, and temperature sensors.

Component Testing

Electrical Component Tests

Testing procedures for thermal cutouts, diodes, triacs, and capacitors.

Motor, Transformer, and Switch Tests

Testing procedures for motors, transformer, and interlock switch assembly.

Service Mode Operations

Menu Navigation and Data Access

Steps to enter service mode, access usage, error history, and settings.

Component Testing via Service Mode

Using service mode to test heater, magnetron, convection fan, and cooling fan.

Updating Firmware

Power Output Test Procedure

Wiring and Schematic Diagrams

ACP XpressChef Series Specifications

General IconGeneral
BrandACP
ModelXpressChef Series
CategoryOven
LanguageEnglish

Related product manuals