Need help?Do you have a question about the ACR Electronics ResQLink PLB-375 and is the answer not in the manual?
Summarizes all warnings and cautions regarding beacon usage, batteries, and dismantling.
Explains why registering is mandatory and beneficial for rescue services.
Describes the process and data flow for beacon registration.
Details the US registration process via NOAA.
General guidance for registering beacons in countries other than the US.
Specifics for registering a beacon in Canada.
Explains the Cospas-Sarsat system and beacon signal transmission.
Describes the physical parts and their functions.
Instructions on how to turn on the beacon in a distress situation.
Details how the GPS receiver works and its placement requirements for optimal signal.
Visual guide on correct antenna and GPS placement for activation.
How to properly turn off the beacon and what to do if it fails.
Guidance on contacting ACR Electronics after a rescue event for feedback.
How to perform a basic operational check of the beacon.
How to test the GPS functionality and its outcomes.
Information on advanced services like 406Link.com for testing and management.
Tips and best practices to avoid false alerts.
Procedure for reporting false activations to authorities.
How to inspect the beacon case and clean it.
Guidelines for battery replacement and factory-authorized service.
Procedures for updating owner details with the national authority.
Actions to take if the beacon is lost or stolen, including reporting.
Physical, environmental, and general operating parameters.
Technical details for both 406 MHz and 121.5 MHz transmitters.
Details on the product's warranty coverage and how to register it.
General| Brand | ACR Electronics |
|---|---|
| Model | ResQLink PLB-375 |
| Category | Security Sensors |
| Language | English |
To Next Page
