To Next Page
R
Roberto ThorntonAug 12, 2025
Why is the date incorrect on my Acroprint Clock?
- LLaura ThomasAug 12, 2025
If the date is incorrect on your Acroprint Clock, it is likely that the date was set incorrectly. To fix this, set the current date.
Why is the date incorrect on my Acroprint Clock?
If the date is incorrect on your Acroprint Clock, it is likely that the date was set incorrectly. To fix this, set the current date.
What to do if my Acroprint Clock does not accept time card?
If your Acroprint Clock isn't accepting time cards, there might be a few reasons. It could be due to a power failure, in which case you should wait until the power supply is restored. Alternatively, the time card itself might be damaged, so try using a new one. Check if the power cord is disconnected; if so, firmly insert it into the power outlet. Also, if cards were inserted or pulled out by force, press the “Reset” button, or unplug the device and plug it back in.
Why is the printing on my Acroprint ATR120 Clock light?
If the printing is too light on your Acroprint Clock, it could be due to several reasons related to the ribbon cartridge. First, ensure that the ribbon cartridge is correctly inserted. If it is, the ribbon might be dried out, necessitating a replacement of the ribbon cartridge. Another possibility is that the ribbon is stuck. Try rotating the ribbon knob, and if the ribbon still doesn’t advance, replace the cartridge.
How to fix ink smudges on my Acroprint ATR120 Clock?
If you're experiencing ink smudges with your Acroprint Clock, it's likely that the ribbon has been inserted behind the print shield. To resolve this, re-install the cartridge, ensuring that the ribbon is inserted between the ribbon guide and the print shield.
Why is my Acroprint ATR120 slow or fast?
If your Acroprint Clock is running slow or fast, there are a couple of potential causes. The time may be set incorrectly, so you should set it correctly. Another reason could be a power failure; in this case, reset the machine.
What to do if I forgot my Acroprint ATR120 Clock password?
Contact Acroprint Customer Support at (800) 334-7190 for assistance in password recovery.
How to fix wrong printing position on Acroprint ATR120?
If the printing position is wrong on your Acroprint Clock, it could be due to a couple of reasons. The day change might be set incorrectly, so ensure you set it correctly. Additionally, the pay period type might not be set correctly for the card type. Make sure to insert the card in the card slot and remove it properly.
What causes settings to change on my Acroprint ATR120?
If you notice settings changing on your Acroprint Clock, it could be due to a low battery backup to the clock memory. In this case, replace the coin cell battery.
Lists the items included in the ATR120 package.
Provides essential usage and safety guidelines for the time recorder.
Details the components and information shown on the time recorder's display.
Explains the function of each button on the time recorder's keypad.
Describes the function of the switches located on the back of the clock.
Illustrates the power and external signal connection points on the back.
Information on the expected lifespan of the ribbon cartridge.
Details the battery pack, its specifications, and warnings for safe handling.
Describes the functions of the Run/Prgm, On/Off, and Reset switches.
Overview of settings for year, month, date, hour, minute, and time format.
Guide to setting pay periods, day of week format, and DST.
Instructions for setting alarm durations, times, and types.
Details on programming the print column for shifts and breaks.
How to configure color changes for printing, e.g., red for late punches.
Lists the main function groups (b000 to b004) and their purposes.
A table summarizing codes and functions within each mode (b000 to b004).
Steps to set the current year on the time recorder.
Procedures to set the current month and date.
Instructions for setting the current hour and minute.
How to choose between 12-hour and 24-hour display formats.
Configuring the day change setting for overnight shifts.
Adjusting the vertical position of printed text on time cards.
Enabling or disabling the audible beep for key presses.
How to set or remove a password to protect menu access.
Steps to configure the monthly pay period settings.
How to set up the weekly pay period and current day of week.
Guide to setting the bi-weekly pay period and current day of week.
Selecting the language and format for printing the day of the week.
Choosing the minute display format (e.g., 1/60, 1/100th hour).
Configuring the start month and date for Daylight Saving Time.
Setting the start hour and minute for Daylight Saving Time.
Configuring the end month and date for Daylight Saving Time.
Setting the end hour and minute for Daylight Saving Time.
General| Type | Time Recorder |
|---|---|
| Model | ATR120 |
| Display | LCD |
| Power Supply | AC Adapter |
| Weight | 3.5 lbs |
| Card Type | Time Cards |
| Print Method | Dot matrix |
| Mounting | Wall Mount |
| Stamp Type | Date and Time Stamp |
