What to do if my Acroprint Clock does not operate?
If your Acroprint Clock isn't operating, make sure that the power cord is correctly plugged into the wall outlet and that the outlet has power.
Why is my Acroprint ES700 not printing?
If your Acroprint Clock is not printing, verify that the ribbon cassette is correctly installed and that the correct print method is selected.
What to do if card is jammed in Acroprint ES700?
If the card is jammed in your Acroprint Clock, press the push bar while simultaneously attempting to remove the card or paper.
What to do if Acroprint ES700 Clock cannot print?
If your Acroprint Clock cannot print and the printer motor or home position sensor isn't working correctly, ensure the ribbon cassette is properly inserted.
How to correct DST setting mistake on Acroprint Clock?
If the Daylight Saving Time (DST) setting is a mistake on your Acroprint Clock, confirm the correct start and end dates for daylight saving time and re-enter them.
Explains how the ES700 Time Recorder automatically sets time and date using the NIST WWVB signal.
Details the procedure for setting the correct time zone for the ES700 Time Recorder.
Describes how the unit automatically receives the atomic clock signal for accurate timekeeping.
Provides instructions on how to disable the Daylight Saving Time feature on the ES700 Time Recorder.
Guides the user through setting the current time and date for the ES700 Time Recorder.
Provides instructions on how to set the current date for the ES700 Time Recorder.
Explains how to select between 12-hour and 24-hour time formats for the ES700 Time Recorder.
Allows selection of the number of digits (two or four) to be printed for the year.
Guides on setting the hour and minute formats, including 12/24 hour and minute precision.
Allows selection of the minute format precision, such as 1/60, 1/100, 1/20, or 1/10.
Lists options for enabling or disabling leading zeros in the printed output.
Displays a list of available pre-programmed comments and their corresponding codes.
Lists the available print language options and examples of their output.
Shows examples of printed output for different print length (font size) settings.
Defines the print direction on the time card (e.g., right-hand or left-hand margin).
Sets how printing is activated (automatic, semi-automatic, manual, or combination).
Details the three modes for DST: Automatic, Off, and Manual.
Instructions for setting the starting date of Daylight Saving Time.
Instructions for setting the ending date of Daylight Saving Time.
Explains how to enter the existing password before making any changes to the unit's settings.
Describes the procedure to disable password protection by entering a specific code.
Operating Environment| operating temperature range | +25° to +113° F (-5° to +45° C) |
|---|---|
| humidity range | 20 to 80% RH, No condensation |
| accuracy | Monthly accuracy + 15 sec. (at 70 Degrees F) |
Power| power input | AC adapter I/P 120 VAC 60/Hz O/P 15V 1300 ma |
|---|---|
| power consumption | Approx. 13 W, 120VAC + 10%, 60Hz |
| calendar | Perpetual, up to year 2099 |
Weight and Dimensions| dimensions | 6.45”X5.63”X6.77” (164mm x 143mm x 172mm) |
|---|---|
| weight | Approx. 5 lbs (Approx. 2.0 kg) |
To Next Page
