ES700 User’s Manual 17
Leading Zero
Change Leading Zero
Example: Set the Leading Zero to "ZERO Disabled".
1. Press SELECT until the S is under the "LEADING ZERO" mark.
2. The flashing digit indicates "Leading Zero Options".
3. In this example, press CHANGE until the option is "1" (Leading Zero Option disabled).
Refer to Leading Zero Options below.
4. Press SET.
Leading Zero Options
OPTION LEADING ZERO PRINT EXAMPLE
1 Zero Disabled JAN 1 PM 3:00
2 Zero Enabled JAN 01 PM 03:00
To Next Page
Loading...
